Products > HT-C-30-12
1) PFC function.
2) Sleeping mode function.
3) Wide input voltage (universal) range operation.
4) LCD remote control.
5) Battery temperature sensor function.
6) Tri-LED color indicator for different charge stage.
7) Prevent the battery overcharging, and extend the battery life.
8) For recovery of the aging (sulfated) battery.
2) Sleeping mode function.
3) Wide input voltage (universal) range operation.
4) LCD remote control.
5) Battery temperature sensor function.
6) Tri-LED color indicator for different charge stage.
7) Prevent the battery overcharging, and extend the battery life.
8) For recovery of the aging (sulfated) battery.
HT-C-30-12/HT-C-15-24 Datasheet
HT-C-30-12/HT-C-15-24 Manual
Model No. | HT-C-30-12 | |
INPUT | ||
Voltage range | 100~240Vac | |
Frequency range | 50/60Hz | |
Efficiency | ≧85% | |
Power factor | 1.0 at full load (±5%) | |
Input socket | IEC plug | |
OUTPUT | ||
Mode Selection | Mode 1 | Mode 2 *1 |
Bulk Stage | 14.4V / 30A | 13.5V / 30A |
Abosrption stage | 14.4V / 30A max. | 13.5V / 30A |
Float stage | 13.5V / 2A max. | 13.5V / 30A |
Aging (sulfated) battery | When the battery <9V. | |
14.4V / 2A | 13.5V / 2A | |
Recommended battery capacity | 75 ~250Ah | |
Leakage current from battery | <1mA | |
Sleeping Mode Function | YES (5A current output only) | / |
PROTECTION | ||
Over Temperature | 55℃±5℃ | |
Output termimal reverse | By Fuse | |
Over load | Yes | |
Output short circuit | Yes | |
Microprocessor check | Yes | |
ENVIRONMENT | ||
Working temp. | -15℃~+45℃ | |
Working humidity | 20~90%RH non-condensing | |
Storage temp., Humidity | -30℃~+70℃ (-22℉~+158℉), 10~95%RH | |
Temp. coefficient | ±0.05%℃ (0~50℃) | |
SAFETY&EMC | ||
EMI conduction & radiation | Compliance to EN55014-1, EN/IEC 61000-3-2 | |
EMS immunity | Compliance to EN55014-2, EN/IEC 61000-4-2, EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-6, EN/IEC 61000-4-11 | |
LVD | Compliance to EN60335-1, EN/IEC 60335-2-29 | |
OTHERS | ||
Remote control | YES | |
Dimension (LxWxH) | 235x179x90 mm | |
Net weight | 3.0 kgs |
*1 Mode 2: DON’T charge the battery!
*2 The above spec. ±0.5V for 12V spec.; ±1.0V for 24V spec.; Amp. ±10% is acceptable.